 |
Support 3.3V to 1.2V flash memory chip in VCC and I/O without low voltage converter. |
 |
Flash chip support up to 128G bit. |
 |
STM28W640CT (4 word programming algorithm) within 11.5 seconds, verify within 3.2 seconds. |
 |
USB interface: support USB 1.1 or 2.0 |
 |
One PC can connect up to 16 unit Labtool-T400 to perform Asynchronous programming. |
 |
Device insertion /continuity check before programming. |
 |
Target quantity and Max failure rate alarm. |
 |
Software update via web |
|
|
LabTool-T400 Turbo Flash Gang Programmer is four sockets PC-based Gang Programmer. It features four independent isolated modules, extremely high speed in writing flash memory chip. It supports 3.3V, 2.7V, 1.8V and 1.2V chip in both VCC and I/O without low voltage converter and handles 8/16/32 bit flash chip in different package through adapter modules, up to 128Gb flash can be support. The LabTool-T400 is an ideal programmer for customers in GSM, 3G Mobile, PDA, Internet router and others. |
|
 |
Unbeatable programming speed and throughput |
|
The LabTool-T400 has build in Compact Flash Card (CF) on board that reduce the massive data transfer between the PC and LabTool-T400 .The LabTool-T400 performance reach the speed limitation of the chips in its spec. No other gang programmer today and future can beat the speed of the LabTool-T400. |
|
|
 |
LabTool-T400 performance ( PC with P4 1.3G 128M RAM) |
|
Type |
 |
STM 4 word algorithm |
 |
Intel EFP algorithm |
 |
Spansion word algorithm |
|
Blank check |
|
1.65s per 64Mb |
|
1.65s per 64Mb |
|
1.65s per 64Mb |
|
Programming |
|
11.5 sec per 64Mb |
|
16.6s per 64Mb |
|
29.5s per 64Mb |
|
Verify |
|
3.2s per 64Mb |
|
3.2s per 64Mb |
|
3.2s per 64Mb |
|
Total |
|
M28W640E
in 16.3 sec |
|
GE28F640W30B
in 21.4 sec |
|
Am29DL640G
in 34.5 sec |
|
|
|
|
 |
3.3V to 1.2V chip in VCC and I/O support |
|
The LabTool-T400 use the 90nm FPGA chip in hardware design, it can handle the chip from 3.3V to 1.2V in both VCC and I/O without need special low voltage converter circuit. This new technology fulfils customers need and makes customers investment fully protected. |
|
|
 |
High density chip support |
|
The LabTool-T400 has reserved the growth potential in chips density. It covers 8/16 bit flash today and futures 32 bit flash chip. Its I/O pin driver can cover flash with Max 128G bit in density. This growth potential protected customers investment without purchasing a new generation programmer over a decade in future. |
|
|
 |
Expansion through USB Hub and configure as a Multi-station Asynchronous Gang
Programmer |
|
The LabTool-T400 interface with PC through USB interface, which support USB 1.1 and 2.0. If customer needs more units in production, just purchase extra LabTool-T400 and connect those LabTool-T400 through USB Hub, up to 256 LabTool-T400 can be attached to one PC. Recommend with 8-16 unit LabTool-T400 control by one PC to avoid performance decrease. Such configuration has significantly reduces the cost per station with low initial purchase cost and growth potential in future. |
|
|
 |
Adapter modules with ID |
|
The LabTool-T400 adapter module has independent ID. After inserting the module in the LabTool-T400, the system will detect the modules ID and compare the corresponding adapter modules with the chip select in software. This future prevents the wrong adapter module insert or wrong chip selection in operation. |
|